|
Copyright © 2008 Radio Visions
RV
Some of our past projects ...
We were called in to see what could be done with existing equipment, a very small budget, and a little creative engineering.
This project involved the design and installation of 3 radio teaching studios.
Wheatstone audio consoles were used along with iMediatouch live This project was a 3 camera, full broadcast digital television studio. The heart of the system is a Ross Synergy 1 switcher. Other equipment includes: Hitachi Z-2500 cameras, 360 Systems video server, Chyron Duet Lyric CG, Link master sync generator, and a Mackie 32 x 8 audio mixer. Studio Technology custom furniture and Middle Atlantic racks were used.
A Panasonic video switcher is located on the front console along with the CG. The rear console supports the audio mixer, VCR's and prompter.
Hopewell Valley Central High School
Pennington, New Jersey
Spotswood High School
Spotswood, New Jersey The control room switcher console Engineering and equipment rack The completed control room
Custom camera controls
View showing lighting and audio
mixer
Video engineering station
One of 3 Hitachi cameras
This project involved the installation of a 3.5 meter C/Ku steerable satellite antenna and 1.8 meter fixed Ku band antenna. We then constructed a headend that combined the satellite feeds with those from the local cable TV company. The signals where then digitized and transported via single mode fiber to distribution hubs throughout the college, for classroom viewing.
Rider University - WRRC FM
Pennington, New Jersey
This project involved the replacement of an existing 4-bay FM antenna with a new SWR, Inc. 4-bay FM antenna
North Brunswick High School
North Brunswick, New Jersey Atlantic Cape Community College Cape May, New Jersey
Spotswood High School
Spotswood, New Jersey
This project involved the design and installation of 3 radio teaching studios.
Wheatstone audio consoles were used along with iMediatouch live
Assembling the Arrakis furniture
Princeton High School
Princeton, New Jersey This was one of our most challenging projects. We were given a 17' X 7' room (usable space is 12' X 7') for use as a control room. With a little creative design, we were able to build a full broadcast quality facillity that meets ADA requirements.
A Ross Synergy 1 switcher was used along with JVC 550 cameras, a 360 Systems video server, Compix CG, and Avitech multi image processors for the video wall.
Studio Technology custom furniture and Middle Atlantic racks were used. Prompter People prompters were used, mounted to JVC 550 cameras. Equipment racks containing the switcher, DA's, frame synchronizers, amplifiers, server, patch panels and CG |